The muffle furnaces L 1/12 - LT 40/12 have been proven for daily laboratory use. These models stand out for their excellent workmanship, advanced and attractive design, and high level of reliability. The muffle furnaces come equipped with either a flap door or lift door at no extra charge.
We can make customize modifications
TECHNICAL SPECIFICATION
| Chamber Design | Double walled |
| Inner Chamber | Inner muffle wound on Kanthal A1 heating elements and embedded with high quality ceramic cement to avoid heat loss |
| Outer Chamber | Outer chamber made of mild steel and finished with powder coated. |
| Insulation | In between muffle and outer walls insulated with high quality light weight ceramic fibre. |
| Heaters | The motorized forced air circulation is provided at the Side to maintain uniform temperature inside the chamber and opposite side air Vent provided to disperse the moisture. |
| Heaters | High grade Kanthal wires wounded on a muffle of suitable wattage. |
| Gasket | An asbestos rope gasket is provided for the door to avoid air leakage and temperature loss from Instrument. |
| Temperature Range | 5 °C above ambient to 1000°C. |
| Temperature Controller | Microprocessor based PID temperature controller with dual display (Process value and set value), low and high limit setting with Thermocouple CRAL ‘K’ type timer control. |
| Thyrister Controller | For replacement of temperature controller to get better accuracy of temperature from minimum to maximum specified temperature range given and to avoid over soot at lower temperature is done by thyristericed temperature controller with Thyisterized Pack. At on extra cost of Rs.9,800.00 up to 5 Kw Single Phase Above 5 to 10 kw the cost around 20,000.00 |
| Temperature Resolution | 0.1°C |
| Temperature Accuracy | ± 1°C. |
| Temperature Accuracy | ± 3°C. |
| Temperature Uniformity | ± 5°C. |
| Power Supply | 230 Volts Single Phase 50Hz, AC supply. |
| Power Supply | 440 Volts three Phase 50Hz, AC supply. |